Model 500 Digital Pulse Processor
The compact model 500 electronics, used in
conjunction with the EDS2000 system, is the ultimate in EDS and Digital
Image acquisition. Dual high speed signal processors acquires the data
for optimum performance.
Software controlled for easy upgrades. Future enhancements are immediately available via the internet, or CD to keep
the EDS2000 system the ultimate in Microanalysis for years to come.
- 80,000 counts per second throughput
- Digital acquisition with programmable time constants
- Compatible with most EDS detectors
- LN monitor with bias shutdown for detector warm-up protection
- 4096-channel multi-channel analyzer (MCA)
- Digital imaging built in
Complete Specification
Model 500 EDS Hardware
- Digital Pulse Processor with programmable gain and pulse pileup rejection
- Programmable time constants 0.3, 0.5, 1, 2, 4, 8, 16, 32 (microseconds)
- 32-bit, 4096 channel multi-channel analyzer (MCA) PCI interface card
- Automatic energy calibration
- Adjustable detector bias
- LN Monitor with bias shutdown for detector warm up protection
- Digital Pulse Processor logic is downloaded from the PC for simple field upgrades
- Built in, on board oscilloscope
- Width x Height x Depth 315 x 112 x 250 mm (12.4 x 4.4 x 9.8 inches)
- Weight 4.5 kg (10 lbs.)
- Voltage 100/120/220/240 V AC user selectable. 47-63 Hz, 85 VA Maximum
- Safety Standard EN61010-1 Electrical equipment for lab use, Electro Magnetic Compliance
EN55022 Class A, EN50082-1, CE-mark